• Home
    •  /
  • Crown Tools

Crown Tools

Showing 1-48 of 83
Crown Tools Brad Pusher ~ Model No. 110XW
Crown Tools Brad Pusher
$ 22.99
2 reviews
Crown Tools Cabinet Screwdriver ~ Made in Sheffield, England
Crown Tools Cabinet Screwdriver
$ 17.25
This Crown Tools Beech Marking Gauge is a quality marking gauge that is a good tool for marking & scribing. 8" overall length. Manufactured from the finest kiln dried Beech. Tough plastic yellow thumb-turn on gage. Crown Tools Model 135. Made in England.
Crown Tools Beech Marking Gauge
$ 11.99
1:8 pitch dovetail square made by Crown Tools in England. Model 1238. This 1:8 pitch gauge is designed for Hardwood. The blued steel blade is hardened & tempered, & the base stock is made of Walnut with solid brass fittings. Great quality tool for dovetail joints. 8:1 pitch dovetail gauge made in Sheffield, England.
Crown Tools Miniature Walnut Dovetail Square ~ 1:8 Pitch
$ 23.95
1 review
Crown Tools 9 oz Warrington Hammer. Forged head with a lacquered Hickory handle. 11-1/4" overall length. Model 552. Made in Sheffield, England.
Crown Tools 9 oz Warrington Hammer
$ 17.50
This hefty "chipping knife" is made by Crown Tools in Sheffield, England. The knife is also known as a hacking knife. It is a stout & heavy-duty knife that's great for use as a glazier knife for glazier's work, general hacking. Model No. 380.
Crown Tools 4-1/2" Chipping Knife / Hacking Knife
$ 19.99
This right hand marking knife by Crown Tools has a bevel on one side of the blade & is flat on the other side. The flat side runs against a straight edge or tri square when marking across work. Great for precision & accurate marking on wood material. Made in Sheffield, England. Model 112W.
Crown Tools Right Hand Marking Knife
$ 11.50
Crown Tools 7-1/2" Triangle Shave Hook. Model No. 330. The blade is made of carbon steel & is hardened & tempered. It is a great wood scraper for general woodworking & scraping purposes. Lacquered Beech handle. Made in Sheffield, England.
Crown Tools 7-1/2" Triangle Shave Hook
$ 9.50
This Crown Tools Mini Walnut Sliding T-Bevel is used for measuring & transferring angles. Hardened & tempered blued steel blade & the walnut bevel fitted with brass. The lever lock secures the blade in any position. A great & handy tool for angle layouts & measurements. Made in Sheffield, England. Model 115MW. 3-3/4" long blade
Crown Tools Mini Walnut Sliding T-Bevel
$ 18.99
Model 152M. Mini Walnut Mortice & Marking Gauge by Crown Tools is great for marking & scribing. Brass thumbscrew on gage. Brass slide. Walnut wood. Made in England.
Crown Tools Mini Walnut Mortice & Marking Gauge
$ 24.99
Crown Tools HSS rosewood round burnisher is great for creating well formed hooks, also know as burrs, on cabinet scrapers. Works well for straight-edged cabinet scrapers, as well as for curved cabinet scrapers too. Rosewood handle. Made in Sheffield, England. Model No 377W. 6" long blade
Crown Tools HSS Rosewood Round Burnisher
$ 21.50
This "Gents Saw" is a high quality saw made by Crown Tools in England. It's a dovetail back saw with 17 TPI with a narrow kerf for fine joints & dovetails, model making, etc. 8" (203 mm) blade length. Blade is made of high quality carbon steel. Brass backing. Model No. 187. Made in Sheffield, England.
Crown Tools 8" Gents Saw - 17 TPI
$ 27.50
This Crown Tools 7-1/2" Walnut Sliding T-Bevel is used for measuring & transferring angles. Features a hardened & tempered blued steel blade & the walnut bevel fitted with brass. The lever lock secures the blade in any position. A great & handy tool for angle layouts & measurements. Made in Sheffield, England. Model 115AW
Crown Tools 7-1/2" Walnut Sliding T-Bevel
$ 27.99
Crown Tools 6" x 3" Cabinet Scraper ~ 0.9 mm thickness. Made in Sheffield, England. The rectangle shaped scraper creates razor-thin shavings & produces a fine smooth finish when used. Moderate stiffness. Made of quality high hardened & tempered high carbon steel. Rectangle Cabinet scraper. Crown Model 375AW.
Crown Tools 6" x 3" Cabinet Scraper ~ 0.9 mm thickness
$ 7.99
4-Piece Chisel Set made by Crown Tools. Sizes include 1/4", 1/2", 3/4", 1" sizes (6 mm, 12 mm, 20 mm, 25 mm). Hot forged from the finest Carbon steel & hardened ready for use. Short 6" length butt chisels - Good for getting into tight areas. Rosewood handle with brass ferrule. Made in Sheffield, England. Model 174RB.
Crown Tools 4-Piece Butt Chisel Set - 1/4", 1/2", 3/4", 1" Sizes
$ 67.50
Crown Tools 1" (25 mm) Filing Knife with a flexible spring-tempered blade. High quality putty knife for filing holes, cracks, etc. Walnut wood handle. Made in Sheffield, England.
Crown Tools 1" Filing Knife
$ 16.95
Model 153. Crown Tools Walnut Mortice & Marking Gauge. Knurled brass thumbscrew on gage. Brass inlay. Walnut wood. Made in England.
Crown Tools Walnut Mortice & Marking Gauge
$ 42.50
The Crown Tools Palette Knife with wooden Handle is a great high quality palette knife used in many applications. Made in Sheffield, England.
Crown Tools Palette Knife
$ 19.99
Crown Tools 7-1/2" Combination Shave Hook. Model No. 332. The blade is made of carbon steel & is hardened & tempered. It is a great wood scraper for general woodworking & scraping purposes. Lacquered Beech handle. Made in Sheffield, England. Teardrop shape blade.
Crown Tools 7-1/2" Combination Shave Hook
$ 9.50
1 review
Hefty "chipping knife" is made by Crown Tools in Sheffield, England. The knife is also known as a hacking knife. It is a stout & heavy-duty knife that's great for use as a glazier knife for glazier's work, general hacking, or use as a lightweight froe. Model 381 - Made in England
Crown Tools 5" Chipping Knife / Hacking Knife
$ 36.50
A special 4-piece mini cabinet scraper set made by Crown Tools in Sheffield, England. The scrapers creates razor-thin shavings & produces a fine smooth finish when used. Crown Tools Model 376M.
Crown Tools 4-Piece Mini Cabinet Scraper Set
$ 18.50
A 3/8" Corner Chisel made by Crown Tools. A handy, time-saving tool used after drilling or routing a mortise. The mortice chisel has an inside bevel. 90 degree V-chisel used to square the mortise corners, hinges, etc. Made in Sheffield, England. Model 175CC
Crown Tools 3/8" Corner Chisel
$ 73.99
This Crown Tools 12" Walnut Sliding T-Bevel is used for measuring & transferring angles. Hardened & tempered blued steel blade & the walnut handle is fitted with brass. The lever lock secures the blade in any position. A great & handy bevel tool for angle layouts & measurements. Made in Sheffield, England. Model 118AW
Crown Tools 12" Walnut Sliding T-Bevel
$ 45.99
Crown Tools 12" English Bowsaw / Turning Saw - Model No. 195X
Crown Tools 12" English Bowsaw / Turning Saw
$ 98.99
Model 154. Crown Tools Walnut Mortice & Marking Gauge with Screwslide Adjustment. Knurled brass thumbscrew on gage. Brass inlay. Walnut wood. Made in England.
Crown Tools Walnut Mortice & Marking Gauge with Screwslide Adjustment
$ 69.99
This left hand marking knife by Crown Tools has a bevel on one side of the blade & is flat on the other side. The flat side runs against a straight edge or tri square when marking across work. Great for precision & accurate marking on wood material. Made in Sheffield, England. Model 112AW.
Crown Tools Left Hand Marking Knife
$ 11.50
Crown Tools Brass Miniature 3" Bullnose Plane ~ Model No. MPBNW
Crown Tools Brass Miniature 3" Bullnose Plane
$ 49.99
Crown Tools Brass Miniature 3" Block Plane ~ Model No. MPBW
Crown Tools Brass Miniature 3" Block Plane
$ 39.99
A high quality & handsome awl made by Crown Tools in Sheffield, England. The blade is made of carbon steel & is hardened & tempered. The handle is made of solid Beechwood with a lacquered finish. Made in Sheffield, England. Model No. 114.
Crown Tools Beechwood Awl - 5" Blade
$ 16.99
This Beech cutting gauge with a brass inlay by Crown Tools is good for marking accurate lines across grain without tearing, & is a good tool for cutting veneers as well. The high carbon steel cutting blade is held in place with a brass wedge. Beech wood. Model 142. Made in England.
Crown Tools Beech Cutting Gauge
$ 25.50
This "Model Makers Saw" is a high quality saw made by Crown Tools in England. It's a small dovetail back saw with 17 TPI with a narrow kerf for fine joints & dovetails, model making, etc. 6" (152 mm) blade length. Blade is made of high quality carbon steel. Brass backing. Model No. 187JSW. Made in Sheffield, England.
Crown Tools 6" Model Makers Saw - 17 TPI
$ 28.99
5" Beechwood mallet made by Crown Tools in England. Model 107. High quality mallet is very sturdy & durable. Manufactured from the finest kiln dried Beech. Great for woodworking applications, chisel work, cabinet making, boat building, furniture work, & other uses. Handle is not lacquered. Made in Sheffield, England.
Crown Tools 5" Beechwood Mallet
$ 23.59
Crown Tools 4" small try square with walnut & brass. Features a hardened & tempered blued steel blade & walnut stock fitted with brass. The brass rivets secure the walnut wood stock to blade. A great apron pocket-sized mini try sqaure. 4" 100mm traditional mini Try / Mitre Square made in Sheffield, England.
Crown Tools 4" Try Square with Walnut & Brass
$ 20.99
This "Gents Saw" is a high quality saw made by Crown Tools in England. It's a small dovetail back saw with 25 TPI with a narrow kerf for fine joints & dovetails, model making, etc. 6" (102 mm) blade length. Blade is made of high quality carbon steel. Brass backing. Model No. 187M. Made in Sheffield, England.
Crown Tools 4" Mini Gents Saw - 25 TPI
$ 23.50
Crown Tools 3-Piece Cabinet Scraper Set. Includes rectangle, convex/concave, & gooseneck scrapers. The scrapers creates razor-thin shavings & produces a fine smooth finish when used. Crown Tools Model 376.
Crown Tools 3-Piece Cabinet Scraper Set
$ 18.99
Crown Tools 3-1/2 oz Pin Hammer. Forged head with a lacquered Hickory handle. 13" overall length. Model 550. Made in Sheffield, England.
Crown Tools 3-1/2 oz Pin Hammer
$ 12.99
This small Crown Tools 3" Veneer Inlay Saw is a high quality saw with fine teeth made by Crown Tools in England. 3/4" blade depth (not including brass backing). Made in Sheffield, England. Model 187VR. 15 TPI
Crown Tools 3" Veneer Inlay Saw - 15 TPI
$ 28.99
Crown Tools 3" (76 mm) Filing Knife with a flexible spring-tempered blade. High quality putty knife for filing holes, cracks, etc. Walnut wood handle. Made in Sheffield, England. Model 314.
Crown Tools 3" Filing Knife
$ 20.99
Crown Tools 2" Filing Knife with a flexible spring-tempered blade. High quality putty knife for filing holes, cracks, etc. Walnut wood handle. Made in Sheffield, England. Model 312.
Crown Tools 2" Filing Knife
$ 17.99
Crown Tools 1-1/2" (38 mm) Filing Knife with a flexible spring-tempered blade. High quality putty knife for filing holes, cracks, etc. Walnut wood handle. Made in Sheffield, England. Model 311.
Crown Tools 1-1/2" Filing Knife
$ 16.99
A special 4-piece mini cabinet scraper set made by Lynx Tools in Sheffield, England. The scrapers creates razor-thin shavings & produces a fine smooth finish when used. Lynx Saws - E. Garlick & Son - Thomas Flinn & Co. Model LMSS. Includes a mini gooseneck, mini oval, mini square, & mini concave/convex scraper.
Lynx 4-Piece Mini Cabinet Scraper Set
$ 17.99
Made in Sheffield, England · Quality veneer inlay saw by Crown Tools that has teeth on both sides & a slightly oval shape. 15 TPI - Teeth have no set on the saw, resulting in thin kerfs & gives precision flush cutting work, it's also excellent for sawing thin hardwoods. Offset handle allows for clearance. Model 187VRW
Crown Tools Veneer Inlay Saw - 15 TPI
$ 26.95
Made in Sheffield, England · Quality veneer inlay saw by Crown Tools that has teeth on both sides & a slightly oval shape. 15 TPI - Teeth have no set on the saw, resulting in thin kerfs & gives precision flush cutting work, it's also excellent for sawing thin hardwoods. Offset handle allows for clearance. Model 187VRW
Crown Tools Veneer Inlay Saw - 15 TPI
$ 26.95
Crown Tools Replacement Blade for Padsaw See Here made by Crown Tools in England. 10" overall length. 11 TPI blade. 1/4" depth. Made in Sheffield, England.
Crown Tools Replacement Blade for Padsaw
$ 6.85
A pair of two "dog leg" chisels made by Crown Tools. These bent corner chisels are the ideal tools for cleaning corners, grooves & mouldings, these tools also enable access to positions where normal chisels cannot work. Bent left & right hand with Rosewood handles. 1/4" (6 mm) size. Model 175RC.
Crown Tools Pair of Bent Corner Chisels - Right & Left
$ 28.50
Crown Tools Padsaw made by Crown Tools in England. 10" overall length. 11 TPI. Model 197W. Made in Sheffield, England.
Crown Tools Padsaw
$ 19.95
A special miter square made by Crown Tools in England. It is a great tool for checking the accuracy of miter joints. The blued steel blade is hardened & tempered. Model No. 134.
Crown Tools 45° Miter Square ~ 10" Size
$ 23.50 Sold out
Crown Tools Rosewood Bradawl ~ Model 110SR
Crown Tools Rosewood Bradawl
$ 14.35 Sold out
1 review
Sale
View full product details →

Unavailable

Sold Out