• Home
    •  /
  • Specialty Clamps

Specialty Clamps

Showing 1-48 of 71
Small Solid Brass Bar Clamp ~ 12" Long - 300 mm
Small Solid Brass Bar Clamp ~ 12" Long - 300 mm
$ 11.95
6 reviews
Small Solid Brass Bar Clamp ~ 6" Long - 150 mm
Small Solid Brass Bar Clamp ~ 6" Long - 150 mm
$ 9.95
3 reviews
Pony Press Screw with Crank Handle
Pony Press Screw with Crank Handle
$ 19.50
2 reviews
Pony Jorgensen Replacement Swivels
Pony Jorgensen Replacement Swivels
$ 2.15
2 reviews
Pony Hold Down Clamp ~ No. 1623 - Pony Tools / Jorgensen - Clamps & Holds on benchtops - 2000 lb. clamping force - offer the advantage of benchtop & machine-table “surface” clamping. They are designed to rotate a full 360° around the holding bolt & can be used on any wood or metal surface - 3" max opening
Pony Hold Down Clamp ~ No. 1623
$ 24.25
FastCap Jack-Of-All-Trades Multi Purpose Clamp, Spreader, & Lift
FastCap Jack-Of-All-Trades Multi Purpose Clamp, Spreader, & Lift
$ 39.99
1 review
Kant Twist Cantilever Clamp - Made in USA ~ T-Handle - Copper plated jaws, screw & T-handle are ideal for welding - Great for spot welding, drilling, bolting - Three different gripping faces: Knurled, smooth & V-slot for holding round stock - Eliminates the distorting & twisting of your work pieces & provides a strong, 4:1 clamp ratio - Deep Throat
Kant Twist Cantilever Clamp with T-Handle
$ 12.75
FastCap Drawer Front Installation Clamp - Made in USA - Great for quick & efficient installation for drawers - Draw Front Clamps work great for Full overlay cabinets or Partial overlay cabinets
FastCap Drawer Front Installation Clamp
$ 57.99
1 review
Pony 8" Bench Hold-Down Clamp ~ No. 1708 - Pony / Jorgensen Model No. 1708 - easy-to-use clamp made for holding work in place on benchtops - solid iron
Pony 8" Bench Hold-Down Clamp ~ No. 1708
$ 13.15
1 review
Replacement Bolt for Pony Hold Down Clamp ~ No. 1623-A - Pony Tools / Jorgensen - Clamps & Holds on benchtops - 2000 lb. clamping force - offer the advantage of benchtop & machine-table “surface” clamping. They are designed to rotate a full 360° around the holding bolt & can be used on any wood or metal surface
Replacement Bolt for Pony Hold-Down Clamp
$ 4.10
Pony 3-Way Edging Clamp ~ 2-1/4" Opening - 2-1/2" Depth - Pony / Jorgensen Model No. 3325 - Ideal for gluing, trimming, molding, welding, veneer edge banding, fastening & other types of clamping
Pony 3-Way Edging Clamp ~ 2-1/4" Opening - 2-1/2" Depth
$ 10.59
Pony Cabinet Claw ~ 2 Pack - Model No. 8510 ~ Combines multiple steps in one - 2-way clamping for tightening & aligning face frames
Pony Cabinet Claw ~ 2 Pack
$ 55.50
Jorgensen "EZ-Hold" 4" Craft / Hobby Clamp - No. 33804 - 50 lb. clamping force - quickgrip style - Non-marring pads
Jorgensen "EZ-Hold" 4" Craft / Hobby Clamp - No. 33804
$ 6.89
1 review
Pony Four Corner Framing Clamp - 4-corner clamp for rectangular and square pieces - Model No. 9424 - 24" ~ Model No. 9448 - 48" ~ Non-marring pads
Pony Four Corner Framing Clamp
$ 26.35
Pony Pipe / Bar Clamp Pads - Pony / Jorgensen Model No. 7456 - Cushions, holds, & protects - Non-marring, non-sticking, non-slipping durable plastic pads
Pony Pipe / Bar Clamp Pads
$ 4.69
1 review
Pony 1" x 15' Nylon Band Clamp with Ratcheting Handle - Jorgensen / Pony Model No. 1215 - 12-tooth ratchet gear & handle design allows to adjust clamping pressure - Nylon Straps - Steel Frame
Pony 1" x 15' Nylon Band Clamp with Ratcheting Handle
$ 17.50
Pony 30' x 2" Canvas Strap Band Clamp - Model No. 6230 ~ 2" wide x 30' long canvas band ~ Dual self-locking mechanisms, which allow the band to be pulled tight from both sides
Pony 30' x 2" Canvas Strap Band Clamp
$ 79.50
A cast iron holdfast with an 11/16″ diameter post & a reach of 3-1/2″. Use a mallet & a vertical blow to lock material tight against the bench surface. Sideways blows will “unlock”. Designed for holding work in place on benchtops & made of cast iron with a black enamel finish. 800-3700. 744391121820
Bench Holdfast ~ 3-1/2" Reach
$ 11.75
American Tool Quick-Grip Hold-Down Clamp Mounting Kit - 40105. Made in USA. 038548401058
American Tool Quick-Grip Hold-Down Clamp Mounting Kit - 40105
$ 7.50
Jorgensen Adaptor Tips for Miter Clamping - 9963. Made in USA. 044295996303
Jorgensen Adaptor Tips for Miter Clamping - 9963
$ 8.85
These Jorgensen Work Protecting Woodworker's Vise Pads are magnetic felt-covered laminated wood pads designed for providing a protective cushion against damage to work. Pads are designed for 10" width vise jaws. Made in USA. Sold as one pair. Model 31310. 044295313100. Felt-covered laminated wood pads
Jorgensen Work Protecting Woodworker's Vise Pads ~ Pair
$ 18.39
Japanese 2-1/2" Drill Press Vise - Eron Vise ~ Top faces & side faces have a ground finish for high accuracy - 2-1/2" jaw opening - 2-1/2" jaw width - Eron Model No. P250 - Main screw with acme thread for smooth operation & allows for powerful clamping - 6 lb. weight - Heavy Duty
Japanese 2-1/2" Drill Press Vise
$ 59.50
Pony 16" Bench Hold-Down Clamp ~ No. 1716 - Pony / Jorgensen Model No. 1716 - easy-to-use clamp made for holding work in place on benchtops - solid iron
Pony 16" Bench Hold-Down Clamp ~ No. 1716
$ 17.50
Pony 3-1/2" Light-Duty Bench Vise with Swivel Base ~ 3" Jaw Opening - Pony / Jorgensen Model No. 23530 - Permanent pipe jaw, ground & polished anvil, & forming horn
Pony 3-1/2" Light-Duty Bench Vise with Swivel Base ~ 3" Jaw Opening
$ 35.50
Pony 1" x 15' Rapid Acting Band Clamp with Large Handle - Pony Jorgensen Model No. 1225 - A versatile clamp useful for awkward, irregular, round, polygon, & square shapes - Excellent for drawers, frames, chair legs, & irregular shapes
Pony 1" x 15' Rapid Acting Band Clamp with Large Handle
$ 21.99
The Starrett 161 Toolmakers' Parallel Clamp features a single clamp (2-1/4") with 1-7/32" throat depth. 2-1/4" (57mm) Capacity, 1-7/32" (30mm) Throat Depth. Made in USA. Model 161C
Starrett 161C Toolmakers Parallel Clamp
$ 87.50
Starrett 161 Toolmakers' Parallel Clamp features a single clamp (1-3/4") with 1" throat depth. 1 3/4" (44mm) Capacity, 1" (25mm) Throat Depth. Made in USA. Model 161B.
Starrett 161B Toolmakers Parallel Clamp
$ 88.35
Starrett 161 Toolmakers' Parallel Clamp features a single clamp (1-1/4") with 13/16" throat depth. 1 1/4" (32mm) Capacity, 13/16" (20.5mm) Throat Depth. Made in USA. Sold as single piece. Model 161A.
Starrett 161A Toolmakers Parallel Clamp
$ 82.75
Starrett 160 Toolmaker's Clamp / Mini Vise. Steel, Case hardened with two takeup blocks, smaller block yields up to 2" capacity, blocks also allow a slight swivel action 8 degree to 10 degree off of 90 degree. Countersunk hole which may be used to fasten to the bench as a vise. Made in USA. Sold as single piece.
Starrett 160 Toolmaker's Clamp / Mini Vise
$ 99.99
Fit this Hold Down with Bolt & Knob in track in tool bases or into jigs & fixtures to save a tremendous amount of set-up time. Hold-down fits easily into the aluminum T-track & is secured by a knob. 744391119827
Hold Down with Bolt & Knob
$ 6.99
This Pony bench dog allows you to hold or secure your work on your benchtop when used with a woodworker’s vise front jaw steel dog. It fits into any 3/4" benchtop hole. 3/4" diameter of shaft. Top plate size: 2-1/4" x 1". Iron Material with Black finish. Pony Jorgensen. Jorgensen Bench Dog. Model 1722. 044295172202
Pony Bench Dog ~ No. 1722
$ 10.25
Stubai Glue Gripping Pliers 150 mm "Leimgripzange". Model 119101. Made in Austria. 9002793112176
Stubai Glue Gripping Pliers 150 mm
$ 22.99
Irwin Vise Grip 9R Locking Welding Clamp. 038548000251
Irwin Vise Grip 9R Locking Welding Clamp
$ 22.99
Irwin Vise Grip 9AC Locking Panel Clamp. Made in USA. Model 9AC. Item No. 251EL5. 038548002514
Irwin Vise Grip 9AC Locking Panel Clamp
$ 22.50
Irwin Vise Grip 8R Locking Sheet Metal Tool makes bending, forming, & crimping sheet metal jobs easier. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness & durability. Model 8R. Item No. 23. 038548000237
Irwin Vise Grip 8R Locking Sheet Metal Tool
$ 18.99
1 review
Adjustable Clamp 30' Heavy Duty Ratchet Band Clamp - Model 88127. Heavy Duty 6,000 lb. - test, 2" wide nylon band. Made in USA. 044295881272
Adjustable Clamp 30' HD Ratchet Band Clamp - 88127
$ 42.99
Jorgensen Veneer Press Screws ~ 9622
Jorgensen Veneer Press Screws ~ 9622
$ 22.99
Jorgensen Sliding Head For Use with Quick-Grip Bar Clamps. Made in USA. 044295349901
Jorgensen Sliding Head for use with Quick-Grip Bar Clamps
$ 4.99
These Kreg 16" Auto-Adjust Bar Clamps adjust automatically when you change material sizes. Just slide the clamp jaws against your workpiece, & then squeeze the handles. "Automaxx" Technology does the rest, closing the clamp with predictable, dependable clamping pressure every time - Model No. KSC16 - 1-1/2" Deep Reach - 0647096806064
Kreg 16" Auto-Adjust Bar Clamp
$ 41.50
These Kreg 8" Auto-Adjust Bar Clamps adjust automatically when you change material sizes. Just slide the clamp jaws against your workpiece, & then squeeze the handles. "Automaxx" Technology does the rest, closing the clamp with predictable, dependable clamping pressure every time - Model No. KSC8 - 1-1/2" Deep Reach - 0647096806057
Kreg 8" Auto-Adjust Bar Clamp
$ 36.99
Pony 5" Quick-Release Vise ~ 7" Jaw Opening - Pony Jorgensen ~ 360° swivel base with single locking nut - Model No. 30105 - 5" jaw width - serrated jaws - Steel replaceable pipe jaw, ground & polished anvil, & forming horn - Patented quick-release jaw
Pony 5" Quick-Release Vise ~ 7" Jaw Opening
$ 171.99
Pony 5" Heavy-Duty Bench Vise with Swivel Base ~ 4" Jaw Opening - Model No. 29050 - Permanent pipe jaws, ground & polished anvil, & forming horn - 120° swivel base with single locking nut - Pony Jorgensen Heavy Duty Vise - Serrated Jaws
Pony 5" Heavy-Duty Bench Vise with Swivel Base ~ 4" Jaw Opening
$ 94.95
Japanese 2-1/2" Angle Drill Press Vise with swivel base - Eron Vise ~ Top faces & side faces have a ground finish for high accuracy - 2-1/2" jaw opening - 2-1/2" jaw width - Eron Model No. P250AS - Main screw with acme thread for smooth operation & allows for powerful clamping - 12 lb. weight - Heavy Duty - Angle adjustment on vise - 360° rotating swivel base
Japanese 2-1/2" Drill Press Angle Vise with 360° Swivel Base
$ 99.99
Pony 8" Medium Duty Woodworker's Vise ~ 7" Jaw Opening - Model No. 27091 - Pony Jorgensen Vise ~ Main screw with acme thread & double steel guide bars for smooth operation
Pony 8" Medium Duty Woodworker's Vise ~ 7" Jaw Opening
$ 51.99
Pony 4" Heavy-Duty Bench Vise with Swivel Base ~ 3-1/2" Jaw Opening - Model No. 29040 - Jorgensen Pony Tools - Permanent pipe jaw, ground & polished anvil, & forming horn
Pony 4" Heavy-Duty Bench Vise with Swivel Base ~ 3-1/2" Jaw Opening
$ 75.50
Pony 10" Professional Rapid-Acting Woodworker's Vise ~ 13" Jaw Opening - Quick Release - Model No. 41012 - Specially cut acme-threaded main screw, cold-drawn steel twin guide bars, & steel handles - Featuring a quick-release system for fast opening & closing - 10" jaw width - serrated jaws
Pony 10" Professional Rapid-Acting Woodworker's Vise ~ 13" Jaw Opening - Quick Release
$ 216.99
Pony 7" Professional Rapid-Acting Woodworker's Vise ~ 9" Jaw Opening - Quick Release - Model No. 40709 - Specially cut acme-threaded main screw, cold-drawn steel twin guide bars, & steel handles - Featuring a quick-release system for fast opening & closing - 7" jaw width - serrated jaws
Pony 7" Professional Rapid-Acting Woodworker's Vise ~ 9" Jaw Opening - Quick Release
$ 199.50
Pony 6-1/2" Light Duty Woodworker's Vise ~ 4-1/2" Jaw Opening - Pony Jorgensen Model No. 26545 - Main screw with acme thread & double steel guide bars for smooth operation - countersunk holes in the jaws are perfect for wood-facing attachments
Pony 6-1/2" Light Duty Woodworker's Vise ~ 4-1/2" Jaw Opening
$ 24.50
Sale
View full product details →

Unavailable

Sold Out