Starrett

Showing 1-48 of 238
Starrett Morse Taper Adapter. Starrett Morse Taper Adapter ~ MA03 - No. 3 Morse Taper. Starrett Morse Taper Adapter ~ MA05 - No. 3 Morse Taper. Starrett Morse Taper Adapter ~ MA06 - No. 2 Morse Taper. Used on lathes & drill presses.
Starrett Morse Taper Adapter
$ 36.65
Starrett 12" Combination Square with Square Head features a reversible lock bolt, scriber, spirit level, and hardened steel, photo-engraved blade with regular finish. 4R Graduations. Starrett combo square. 11H-12-4R. EDP 50055. Made in USA. 049659500554
Starrett 12" Combination Square - 11H-12-4R
$ 100.99
Starrett Tool & Instrument Oil is the same extra fine lubricant used in the Starrett factory to lubricate & protect Starrett Precision Measuring Tools & instruments. Also great for use in the workshop, by mechanics, home, sports, etc. Tool Box size. Made in USA. 4 fl. oz.
Starrett Tool & Instrument Oil
$ 12.99
Starrett Tolerance Hands - Pair
Starrett Tolerance Hands - Pair
$ 4.95
Starrett Replacement Point For 70A Pocket Scriber. 2-3/8" (60mm) long point scriber point. Scribe point is steel, properly hardened & finely tapered. Starrett Model No. PT02355A. Made in USA.
Starrett Point For 70A Pocket Scriber
$ 4.70
Starrett "Kleenscribe" Layout Dye - Deep, Opaque Blue - 4 oz. Model No. 1610-4. 049659532128. Made in USA.
Starrett Layout Dye - Deep, Opaque Blue - 4 oz
$ 15.85
Starrett KA19 Hole Saw Arbor. Hole enlargement arbor. Replaces the pilot drill in any A1, A2 or A10 type arbors. Replacing the pilot drill, the KA19 allows diameters to be enlarged by attaching a saw of the same size to that of the existing hole. *Note: Arbor, chuck and hole saws in photo not included. 0049659016123
Starrett KA19 Hole Saw Arbor
$ 11.25
Starrett Inch Reading Double Steel Square Model 14A. Hardened & ground head & blade. Designed for tool & diemakers, the precision double steel square has an adjustable blade, ideal for tight fits. 2-1/2" with Graduated Blade. Made in USA. Starrett Sqaure. Made in USA. 049659501179
Starrett Inch Reading Double Steel Square - 14A
$ 133.95
The Starrett Protractor Head for Combination Squares, Combination Sets and Bevel Protractors. Protractor Head designed only for bevel protractors - Cast Iron. Model CPR-1224W. 049659646016. Made in USA.
Starrett CPR-1224W Satin Chrome Protractor Head
$ 159.99
Starrett Center Punch Set - S264WB. Square Shank features square knurled grip & will not roll when laid down. It is hardened & properly tempered. Tips are accurately centered & ground at the proper angle to give maximum service. Sizes included: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4". 049659512854. Made in USA.
Starrett Center Punch Set - S264WB
$ 99.95
This Starrett Hole Saw Arbor is supplied with 1/4" pilot drill (6.35mm). 1/32" shank size (11 mm). Screw thread 5/8"-18. HSS Pilot Bit. 3/8" chuck capacity size of jaws. Quick hitch arbor, allowing instant change of hole saw without tools & without removing the arbor from the chuck. Starrett Model A10. 0049659566154
Starrett A10 Arbor for Hole Saws - 5/8-18 ~ HSS Pilot Bit - 3/8" Hex Shank
$ 15.85
These Starrett 9" Carpenters Dividers combine rigidity, light weight & easy handling. The legs are forged steel, well-shaped, properly tempered & highly polished. The adjustable point may be quickly removed & a common pencil inserted in its place. 9" (225mm) size. Made in USA.
Starrett 9" Carpenters Divider
$ 232.50
Starrett 70A Pocket Scriber - 1/4" Body. Steel handle, knurled, & nickel plated. Scriber is held firmly in the handle by a knurled chuck. Can be reversed, telescoped into the handle, & locked by the chuck. 2-3/8" (60mm) long scriber point. Hexagon-shaped head prevents rolling. Starrett Pocket Scribe. Made in USA.
Starrett 70A Pocket Scriber - 1/4" Body
$ 16.80
The Starrett 6" Hook Rule - 1/8", 1/16", 1/32", 1/64" Grads. Starrett 6" Spring-Tempered Steel Rule with Inch Graduation features a satin chrome finish. Graduations at 8ths, 16ths, quick-reading 32nds, 64ths. 6", 4R Grad, Adjustable Double Hook 64ths. Made in USA.
Starrett 6" Double Hook Rule - 1/8", 1/16", 1/32", 1/64" Grads
$ 42.75
Starrett 6" Combination Square with Square Head features a reversible lock bolt, scriber, spirit level, and hardened steel, photo-engraved blade with regular finish. 4R Graduations. Starrett combo square. 11H-6-4R. EDP 50051. Made in USA. 049659500516
Starrett 6" Combination Square - 11H-6-4R
$ 99.50
Starrett 5m Metric Tape Measure. 5m length - 3/4" width - Metric Graduations. Durable ABS plastic case. Steel belt clip. Starrett Model KTS34-5M. 049659306620
Starrett 5m Metric Tape Measure
$ 5.50
The Starrett 554 Mini Slotted Screwdriver with a 1/16" size slot blade. Overall screw driver length is 2-1/2" long. Small split ring attached. Made in USA.
Starrett 554 Mini Slotted Screwdriver
$ 25.65
The 553B Pocket Screwdriver features a hexagonally shaped head to prevent them from rolling. When not in use, the blade can be reversed into the screwdriver body for conveniently & safely carrying them in pockets. Size takes no more room than a penknife. With 3" (75mm) Blade, Overall length is 5 5/8" (140mm). Slotted Head. Made in USA.
Starrett 553B Pocket Screwdriver
$ 25.65
The 553A Pocket Screwdriver features a hexagonally shaped head to prevent them from rolling. When not in use, the blade can be reversed into the screwdriver body for conveniently & safely carrying them in pockets. Size takes no more room than a penknife. With 1-7/8" (48mm) Long Blade, Overall Tool Length is 4-1/4" (110mm). Slotted Head. Made in USA.
Starrett 553A Pocket Screwdriver
$ 23.30
Model No. 800E. Hardened & Tempered. Starrett 800 Nail Set has a large, square head that provides a large striking surface and prevents the tool from rolling. 4" (100mm) Length, 5/32" (4mm) Punch Diameter. 0496595303396. Made in USA.
Starrett 5/32" Nail Set - 800E
$ 16.75
Starrett 4" Satin Square Combination Square with Square Head features a reversible lock bolt and hardened steel, photo-engraved blade with satin chrome finish. This product also includes a cast iron head with black wrinkle finish. 4", 4R Grad, Regular Blade. Starrett combo square. EDP 56360. Made in USA.
Starrett 4" Satin Chrome Combination Square - C11H-4-4R
$ 102.99
Starrett 12" Blade for Combo Square, Sets & Bevel Protractors. 1/8", 1/16", 1/32", 1/64" Grads. Satin Chrome finish blade. Blade only. Made in USA. 049659500844.
Starrett 12" Blade for Combo Square - 1/8", 1/16", 1/32", 1/64" Grads
$ 66.50
The Starrett 264 Center Punch has a square knurled grip & will not roll when laid down. 1/4" Size. The punch is hardened & properly tempered. The tip is accurately centered & ground at the proper angle to give maximum service. 5" Length. Model 264G. Made in USA.
Starrett 1/4" Center Punch - 264G
$ 11.75
Model No. 800A. Hardened & Tempered. Starrett 800 Nail Set has a large, square head that provides a large striking surface and prevents the tool from rolling. 4" (100mm) Length, 1/32" (0.8mm) Punch Diameter. 049659530292. Made in USA.
Starrett 1/32" Nail Set - 800A
$ 15.80
Starrett 1" x 8m Metric Tape Measure
Starrett 1" x 8m Metric Tape Measure
$ 18.50
Starrett "Tough Grip" Non-Slip Tool Pad Roll - 24" x 36" size. Keeps tools from sliding & protects the calibration of sensitive tools. May also use as a holding aid when sanding or using wood chisels. Made in USA. Starrett Model No. TG-36. 049659688535
Starrett "Tough Grip" Non-Slip Tool Pad - 24" x 36"
$ 18.99
Starrett 263 Micrometer Head - USED. Made in USA.
Starrett 263 Micrometer Head - USED
$ 39.95
Starrett 1-1/2" to 8" Inside Micrometer - USED. Made in USA.
Starrett 1-1/2" to 8" Inside Micrometer - USED
$ 159.95
The Starrett 676-2 Magnetic Block. These magnetic backs provide a quick and easy means of attaching any Starrett AGD indicator to flat, ferrous metal surfaces. A real time saver for machine, jig and fixture set up. Requires no clamps, rods or snugs. Made in USA.
Starrett 676-2 Magnetic Block
$ 64.50
The Starrett 672-2 Indicator Back for 25 Series. Featuring a universal ball joint attached to the end of a gooseneck shank, these attachments make it possible to position an AGD indicator at any desired setting. The indicator can be rotated 360 Deg and angularly up to 90 Deg and locked in the desired position by tightening a single knurled nut. Straight shank is 3/8" (9.5mm) in diameter. for Nos. 25, 2600 Series. Made in USA.
Starrett 672-2 Indicator Back for 25 Series
$ 127.99
The Starrett 657AA Magnetic Base Indicator Holder is for use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators. Also accommodates similar indicators of other manufacturers. Box not included. Made in USA.
Starrett 657AA Magnetic Base Indicator Holder Set
$ 232.50
The Starrett 657A Magnetic Base Indicator Holder includes a swivel post assembly that provides universal adjustment in both horizontal and vertical planes. Magnetic Base with Swivel Post Assembly. Made in USA.
Starrett 657A Magnetic Base with Swivel Post Assembly
$ 233.50
Starrett 657T Flex-O-Post Indicator Holder Magnetic Base with Flex-O-Post Assembly. Model 52760. Made in USA. Model 657T
Starrett 657T Flex-O-Post Indicator Holder Magnetic Base with Flex-O-Post Assembly
$ 325.50
Starrett V436.1MXRL-25 Outside Metric Micrometer
Starrett V436.1MXRL-25 Outside Metric Micrometer
$ 185.50
Starrett Universal Back Plunger Dial Indicator - 196B1. 0.200" Range, 0-100 Dial Face, .001" Graduations. 50699. Made in USA.
Starrett Universal Back Plunger Dial Indicator - 196B1
$ 172.99
Starrett Universal Back Plunger Dial Indicator
Starrett Universal Back Plunger Dial Indicator
$ 299.99
Starrett 91 Tap Wrench is strong & well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 16" Length, 5/16-3/4" Tap Size.
Starrett Tap Wrench - 5/16" to 3/4" Capacity Size
$ 202.99
Starrett 91 Tap Wrench is strong & well proportioned. It is nicely finished and the gripping surface is properly tempered. Starrett Tap Wrench - 1/16" to 1/4" Capacity Size. Starrett Model 91A.
Starrett Tap Wrench - 1/16" to 1/4" Capacity Size
$ 64.99
Starrett 230 & 230M Outside Micrometer includes 0-1" range, friction thimble, lock nut, carbide face, 0-1" Range, .0001" Grad, Carbide Faces, Friction Thimble, Lock Nut. Made in USA. Model T230XFL
Starrett T230XFL Outside Micrometer
$ 273.50
Starrett S831EZ Small Hole Gage Set. The Starrett 831 Small Hole Gage Set contains a gaging surface that is a half-ball with a flat bottom. This permits use in even the most shallow holes, slots, and recesses. SET of 4: Nos. 831A/B/C/D, in Case. Made in USA. 049659530872
Starrett S831EZ Small Hole Gage Set
$ 204.50
Starrett S829FZ Hole Gage Set - USED
Starrett S829FZ Hole Gage Set - USED
$ 69.95
Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. Model S579HZ. Includes No. A, B, C, D, F, E gages.
Starrett S579HZ Telescoping Gage Set
$ 317.99
Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. Model S579GZ. Includes No. A, B, C, D, gages
Starrett S579GZ Telescoping Gage Set
$ 189.99
Starrett S830FZ Small Hole Gage Set - USED
Starrett S830FZ Small Hole Gage Set - USED
$ 79.99 Sold out
Starrett Plastic Miter Protractor takes error-prone calculations out of the process of miter cuts. Tool is ideal for carpenters, plumbers & all building trades that require the measuring and transferring of angles & invaluable for home use. Model 505P-7
Starrett Miter Protractor - 505P-7
$ 33.60 Sold out
This Starrett Hole Saw arbor adapter fits arbors with a 1/2"-20 screw thread, allowing use of saws up to 6" (152 mm) diameter. Not recommended for heavy duty work. Model A12. 049659632606. Hole Saw Arbor adapter.
Starrett Hole Saw Arbor Adapter ~ A12
$ 3.95 Sold out
Model No. 800C. Hardened & Tempered. Starrett 800 Nail Set has a large, square head that provides a large striking surface and prevents the tool from rolling. 4" (100mm) Length, 3/32" (2.5mm) Punch Diameter. 496595303150. Made in USA.
Starrett 3/32" Nail Set - 800C
$ 16.75 Sold out
Starrett 2-3/4 oz Steel Plumb Bob ~ Model No. 177A - Made in USA
Starrett 2-3/4 oz Steel Plumb Bob
$ 80.40 Sold out
1 review
Sale
View full product details →

Unavailable

Sold Out