Starrett 1/16" Center Punch - 264A
Starrett 1/16" Center Punch - 264A
Shipping calculated at checkout.
Couldn't load pickup availability
Made in USA
- Starrett Model 264A
- 1/16" (1.5mm) - Diameter tapered point
- Made of specially selected steel - Hardened & Tempered
- Point is ground at the proper angle to give maximum service
- 3" length of center punch
- Knurled grip for secure holding
-
The Starrett 264 Center Punch has a square knurled grip & will not roll when laid down. 1/16" (1.5mm) - Diameter tapered point. The punch is hardened & properly tempered. The tip is accurately centered & ground at the proper angle to give maximum service. 3" (75mm) Length. Made in USA. -
Product Size Overall Length of Center Punch
Model # Starrett 1/16" Center Punch - 264A 1/16" 3" 264A | EDP #: 51278
For California Residents:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
The Starrett 264 Center Punch has a square knurled grip & will not roll when laid down. 1/16" (1.5mm) - Diameter tapered point. The punch is hardened & properly tempered. The tip is accurately centered & ground at the proper angle to give maximum service. 3" (75mm) Length. Made in USA.