Clamps

Home
Clamps

Clamps

Small Solid Brass Bar Clamp ~ 12" Long - 300 mm

Small Solid Brass Bar Clamp ~ 12" Long - 300 mm

$ 11.95

6

Small Solid Brass Bar Clamp ~ 6" Long - 150 mm

Small Solid Brass Bar Clamp ~ 6" Long - 150 mm

$ 9.95

3

Pony Press Screw with Crank Handle

Pony Press Screw with Crank Handle

$ 19.50

2

Pony Jorgensen Replacement Swivels

Pony Jorgensen Replacement Swivels

$ 2.15

2

Pony Hold Down Clamp ~ No. 1623 - Pony Tools / Jorgensen - Clamps & Holds on benchtops - 2000 lb. clamping force - offer the advantage of benchtop & machine-table “surface” clamping. They are designed to rotate a full 360° around the holding bolt & can be used on any wood or metal surface - 3" max opening

Pony Hold Down Clamp ~ No. 1623

$ 24.25

Pinch Dog ~ 1-1/2" Length Between Points ~ Made in USA

CS Osborne Pinch Dog ~ 1-1/2" Length

$ 6.89

1

Pony Deep Reach 3/4" Pipe Clamp Fixture ~ No. 56 - Pony Tools / Jorgensen Pipe Clamp - #56 ~ Reverse the heads to easily turn it into a spreader clamp. Ideal for use in tight quarters - 2-1/2" Depth

Pony Deep Reach 3/4" Pipe Clamp Fixture ~ No. 56

$ 20.35

FastCap Jack-Of-All-Trades Multi Purpose Clamp, Spreader, & Lift

FastCap Jack-Of-All-Trades Multi Purpose Clamp, Spreader, & Lift

$ 39.99

1

Kant Twist Cantilever Clamp - Made in USA ~ T-Handle - Copper plated jaws, screw & T-handle are ideal for welding - Great for spot welding, drilling, bolting - Three different gripping faces: Knurled, smooth & V-slot for holding round stock - Eliminates the distorting & twisting of your work pieces & provides a strong, 4:1 clamp ratio - Deep Throat

Kant Twist Cantilever Clamp with T-Handle

$ 12.75

Jorgensen 8" Light-Duty Steel Bar Clamp ~ No. 3708-LD - Pony Jorgensen ~ Cast iron heads & rust resistant steel bars ~ 8" max opening ~ 300 lbs. clamping pressure ~ Light Duty style

Jorgensen 8" Light-Duty Steel Bar Clamp ~ No. 3708-LD

$ 9.30

Jorgensen 12" x 3" Drop-Forged Bar Clamp - No. 75312 - Jorgensen Pony - 450 lbs. clamping pressure - 3" throat depth - 12" max opening - Drop-forged steel bar is chrome plated to ward off rust longer, & a heat-treated acme screw provides increased durability

Jorgensen 12" x 3" Drop-Forged Bar Clamp - No. 75312

$ 17.65

1

Pony 8" Bench Hold-Down Clamp ~ No. 1708 - Pony / Jorgensen Model No. 1708 - easy-to-use clamp made for holding work in place on benchtops - solid iron

Pony 8" Bench Hold-Down Clamp ~ No. 1708

$ 13.15

1

Pinch Dog ~ 2-1/2" Length Between Points ~ Made in USA

CS Osborne Pinch Dog ~ 2-1/2" Length

$ 7.50

1

Replacement Bolt for Pony Hold Down Clamp ~ No. 1623-A - Pony Tools / Jorgensen - Clamps & Holds on benchtops - 2000 lb. clamping force - offer the advantage of benchtop & machine-table “surface” clamping. They are designed to rotate a full 360° around the holding bolt & can be used on any wood or metal surface

Replacement Bolt for Pony Hold-Down Clamp

$ 4.10

Pony 3-Way Edging Clamp ~ 2-1/4" Opening - 2-1/2" Depth - Pony / Jorgensen Model No. 3325 - Ideal for gluing, trimming, molding, welding, veneer edge banding, fastening & other types of clamping

Pony 3-Way Edging Clamp ~ 2-1/4" Opening - 2-1/2" Depth

$ 10.59

Bessey "UniKlamp" is a light duty universal clamp/spreader for bench top projects with a lighter frame & rail. Gentle touch jaws distribute the clamping pressure along the entire length of the rail & are ideal for sensitive work pieces & right angles. 24" max opening - 3-1/8" throat depth - Model UK3.024 - Wood handles - 091162006719

Bessey 24" UniKlamp Clamp ~ UK3.024

$ 26.99

Pony Cabinet Claw ~ 2 Pack - Model No. 8510 ~ Combines multiple steps in one - 2-way clamping for tightening & aligning face frames

Pony Cabinet Claw ~ 2 Pack

$ 55.50

Jorgensen 24" Heavy-Duty Steel Bar Clamp ~ No. 3724-HD - Pony Jorgensen ~ Cast iron heads & rust resistant steel bars ~ 24" max opening ~ 1,000 lbs. clamping pressure ~ Heavy Duty style

Jorgensen 24" Heavy-Duty Steel Bar Clamp ~ No. 3724-HD

$ 20.80

1

Pony Professional 3/4" Pipe Clamp Fixture ~ No. 55 - Pony / Jorgensen Heavy duty professional model - Adjustable stand provides stable work base - Large Clamping Face -1-3/4" - Crank Handle - Industrial pipe clamp - #55

Pony Professional 3/4" Pipe Clamp Fixture ~ No. 55

$ 23.49

Jorgensen "EZ-Hold" 4" Craft / Hobby Clamp - No. 33804 - 50 lb. clamping force - quickgrip style - Non-marring pads

Jorgensen "EZ-Hold" 4" Craft / Hobby Clamp - No. 33804

$ 6.89

1

Ulmia Spring Miter Clamp Pliers ~ Made in Germany

Ulmia Spring Miter Clamp Pliers

$ 65.69

This "Miro-Moose" Maple cam clamp by Dubuque Clamp Works is a lightweight wooden cam clamp with a 8" opening capacity & 6" deep throat. The upper jaw slides into position, & the offset cam lever delicately locks the work piece in place giving strong pressure. The clamp has cork pads. Made in USA. Model 00016

Dubuque "Miro-Moose" 8" x 6" Wooden Cam Clamp

$ 18.99

1

Pony Four Corner Framing Clamp - 4-corner clamp for rectangular and square pieces - Model No. 9424 - 24" ~ Model No. 9448 - 48" ~ Non-marring pads

Pony Four Corner Framing Clamp

$ 26.35

Jorgensen 24" Medium-Duty Steel Bar Clamp ~ No. 3724 - Pony Jorgensen ~ Cast iron heads & rust resistant steel bars ~ 24" max opening ~ 600 lbs. clamping pressure ~ Medium Duty style

Jorgensen 24" Medium-Duty Steel Bar Clamp ~ No. 3724

$ 13.99

Jorgensen 12" Medium-Duty Steel Bar Clamp ~ No. 3712 - Pony Jorgensen ~ Cast iron heads & rust resistant steel bars ~ 12" max opening ~ 600 lbs. clamping pressure ~ Medium Duty style

Jorgensen 12" Medium-Duty Steel Bar Clamp ~ No. 3712

$ 13.25

Jorgensen "EZ-Hold" Medium-Duty / Spreader Expandable Clamp ~ 12" Opening - Jorgensen Model No. 33412 - Comfortable one-hand clamping - Reversible Jaw converts clamp to spreader - 300 lbs. clamping pressure - 12" max opening

Jorgensen "EZ-Hold" Medium-Duty / Spreader Expandable Clamp ~ 12" Opening

$ 23.35

Ulmia Miter Clamp Ring ~ Size E

Ulmia Spring Miter Clamp Ring ~ Size E

$ 34.95

1

Soft Pad for Quick Grip Clamps. 1-1/8" opening, 2" depth inside. Soft plastic cap for non-slip, gentle clamping. Sold as one pad each. Model 40155QC. Irwin Quick Grip.

Soft Pad for Quick Grip Clamp - 40155QC

$ 1.95

2-1/2" Opening Capacity - 5" Jaw Length - Fine quality hard maple jaws apply even pressure to a broad area. Bench clamp for gluing & assembly work. Spindles & swivel nuts are made of cold drawn carbon steel. Threads have double leads for rapid operation & close tolerances for extra wear. Made in USA. 099687000052

Dubuque "Miro-Moose" 5" Wooden Handscrew Clamp

$ 16.70

This "Miro-Moose" Maple cam clamp by Dubuque Clamp Works is a lightweight wooden cam clamp with a 24" opening capacity & 4-1/2" deep throat. The upper jaw slides into position, & the offset cam lever delicately locks the work piece in place giving strong pressure. The clamp has cork pads. Made in USA. Model 00019

Dubuque "Miro-Moose" 24" x 4-1/2" Wooden Cam Clamp

$ 26.50

Bessey Light-Duty Steel Bar Clamps heads are made of malleable cast iron. The fixed jaw & sliding arm generates powerful & rigid clamping - acts against torsional forces - Wooden handles - 600 lbs. clamping pressure - Model No. TGJ2.512 - "TG series" Bessey Clamps 12" max opening - 2-1/2" throat depth - Made in Germany - 091162006023

Bessey 12" Light-Duty Steel Bar Clamp ~ TGJ2.512

$ 16.99

Bessey Light-Duty Steel Bar Clamps heads are made of malleable cast iron. The fixed jaw & sliding arm generates powerful & rigid clamping - acts against torsional forces - Wooden handles - 600 lbs. clamping pressure - Model No. TGJ2.506 - "TG series" Bessey Clamps 6" max opening - 2-1/2" throat depth - Made in Germany - 091162006016

Bessey 6" Light-Duty Steel Bar Clamp ~ TGJ2.506

$ 15.80

Jorgensen 5" Deep-Reach Throat Bar Clamp ~ 12" Max Opening - No. 4512 - Cast iron heads & rust resistant steel bars - 1,200 lbs. clamping pressure - With protected poly-vinyl handle & copper-plated screw & swivel end - Heavy Duty Deep Throat Clamp - 5" Deep

Jorgensen 5" Deep-Reach Throat Bar Clamp ~ 12" Max Opening - No. 4512

$ 39.75

Jorgensen 12" Light-Duty Steel Bar Clamp ~ No. 3712-LD - Pony Jorgensen ~ Cast iron heads & rust resistant steel bars ~ 12" max opening ~ 300 lbs. clamping pressure ~ Light Duty style

Jorgensen 12" Light-Duty Steel Bar Clamp ~ No. 3712-LD

$ 9.65

Jorgensen 12" Gear Clamp - Pony Jorgensen Model No. 38012 - Distinctive 'power bar' for rapid action - Quick & handy release button - 12" max opening - 3" reach - 600 lbs. clamping pressure

Jorgensen 12" Gear Clamp

$ 26.50

Pony C-Clamp ~ 2-1/2" Opening Capacity x 6" Jaw Depth - Pony Jorgensen Model No. 246 - Bright zinc plated steel - 2,400 lb. clamping force

Pony C-Clamp ~ 2-1/2" Opening Capacity x 6" Jaw Depth

$ 13.95

Pony C-Clamp ~ 1-3/8" Opening Capacity x 3-1/2" Jaw Depth - Pony Jorgensen Model No. 237 - Bright zinc plated steel - 1-3/8" opening - 3-1/2" depth - 500 lb. clamping force - Carriage Clamp

Pony C-Clamp ~ 1-3/8" Opening Capacity x 3-1/2" Jaw Depth

$ 9.35

Pony 3" Opening Classic Spring Clamp ~ No. 3203-HT - Pony Jorgensen - With protected poly-vinyl handles & tips - Vinyl Cushion Handles - protected handles & jaw tips mean you can use them on metal, wood, plastic, fabric - Steel Spring Clamp

Pony 3" Opening Classic Spring Clamp ~ No. 3203-HT

$ 7.19

Pony 2" Opening Classic Spring Clamp ~ No. 3202-HT - With protected poly-vinyl handles & tips - Pony / Jorgensen - poly-vinyl protected handles & jaw tips mean you can use them on metal, wood, plastic, fabric - 2" max opening - Steel Spring Clamp

Pony 2" Opening Classic Spring Clamp ~ No. 3202-HT

$ 3.99

Pony 1" Opening Classic Spring Clamp ~ No. 3201-HT - With protected poly-vinyl handles & tips - Pony / Jorgensen - poly-vinyl protected handles & jaw tips mean you can use them on metal, wood, plastic, fabric - 1" max opening - Steel Spring Clamp

Pony 1" Opening Classic Spring Clamp ~ No. 3201-HT

$ 2.59

Pony Pipe / Bar Clamp Pads - Pony / Jorgensen Model No. 7456 - Cushions, holds, & protects - Non-marring, non-sticking, non-slipping durable plastic pads

Pony Pipe / Bar Clamp Pads

$ 4.69

1

Pony 1" x 15' Nylon Band Clamp with Ratcheting Handle - Jorgensen / Pony Model No. 1215 - 12-tooth ratchet gear & handle design allows to adjust clamping pressure - Nylon Straps - Steel Frame

Pony 1" x 15' Nylon Band Clamp with Ratcheting Handle

$ 17.50

Ulmia Spring Pinch Clamp ~ Size 168-1

Ulmia Spring Pinch Clamp ~ Size 168-1

$ 72.99

Ulmia Miter Clamp Ring ~ Size D

Ulmia Spring Miter Clamp Ring ~ Size D

$ 33.65

Pony 3-1/2" Butt Hinge Gauge - 9035

$ 5.89

Bessey 8" "KliKlamp" Light Duty Lever Clamp KLI3.008 creates up to 260 lbs. of clamping force. Positive locking ratchet action. Made of sturdy magnesium which makes it lightweight & strong. Fixed arm with v-grooves holds round & angular components firmly in place. 8" clamping capacity - 3" throat depth. Made in Germany

Bessey 8" KliKlamp Light Duty Lever Clamp ~ KLI3.008

$ 23.99

This Bessey 12" HD One-Handed PowerGrip Clamp PG12 is a heavy duty one-handed clamp that is easy to use. To pre-adjust the jaw use the easy slide button to position with just one hand; then squeeze the handle to hold the clamp; and simply turn the handle to apply the full pressure. 12" max opening - 4" throat depth.

Bessey 12" Heavy Duty One-Handed PowerGrip Clamp - PG12

$ 49.99

Bessey 2-PC One-Handed Track Saw Guide Table Clamps EZR SET are designed to work with track saw guides. Guide on top section for grooves 12 x 6.5 mm to 12 x 8 mm. Use with adapter on bottom section & rotated top section for secure fastening of guide rails of Festool, Protool, Metabo, Makita, Hitachi/Hikoki, Dewalt.

Bessey 2-PC One-Handed Track Saw Guide Table Clamps - EZR-SET

$ 29.99

Previous
1
2
3
…
7
Next

Copyright © 2023, Hardwick & Sons