Two Cherries 90° Mortise Chisel - 12 MM
Two Cherries 90° Mortise Chisel - 12 MM
Couldn't load pickup availability
Made in Germany
- Model No. 3148
- 90° angle for squaring mortise corners
- Made of quality high carbon steel - Tempered to Rc61 Rockwell
- Polished blade
- Varnished Hornbeam handle
-
A 90° Mortise Chisel made by Two Cherries in Germany. A handy, timesaving tool used after drilling or routing a mortise. The mortice chisel has an inside bevel. 90 degree V-chisel used to square the mortise corners. Two Cherries Model 3148-12. Made in Germany.Two Cherries Tools is a family owned Germany company that has been in business for over 155 years. Since 1858, they have been producing high quality woodworking tools using the finest steel available.
-
Product Blade Width Overall Length
Model # Model # Two Cherries 90° Mortise Chisel - 12 MM 12 mm 10" 3148 500-4050 For California Residents:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
- Reviews
- Questions
United StatesTwo Cherries or Harbor Freight??
Wow, didn’t want to believe Two Cherries could make something this poor. I own perhaps 20-25 Two Cherries chisels, all made/perform well, but this was very disappointing. (Wondering if this was really a carving chisel, just incorrectly marketed?)? - Both backs are out-of-straight about .100” (!) in 3”. Poor! - Not ground to anything close to a 90 degree in EITHER plane. I spent an hour trying to correct this, but in reality this will not work well. I’ll try to exchange (maybe this was a fluke?), or get a refund. Absolutely disappointed!! -
- Reviews
- Questions
United StatesTwo Cherries or Harbor Freight??
Wow, didn’t want to believe Two Cherries could make something this poor. I own perhaps 20-25 Two Cherries chisels, all made/perform well, but this was very disappointing. (Wondering if this was really a carving chisel, just incorrectly marketed?)? - Both backs are out-of-straight about .100” (!) in 3”. Poor! - Not ground to anything close to a 90 degree in EITHER plane. I spent an hour trying to correct this, but in reality this will not work well. I’ll try to exchange (maybe this was a fluke?), or get a refund. Absolutely disappointed!! -