Bahco 12" Pro-Grade Veneer Saw ~ 14 TPI
Bahco 12" Pro-Grade Veneer Saw ~ 14 TPI
Couldn't load pickup availability
Made in Sweden
- Model PC-12-VEN
- Designed for fine & medium-thick materials, such as plywood, laminates & plastics
- 14 TPI
- Curved, toothed nose for starting cuts in the middle of the surface of the work piece
- Long-lasting sharpness from the super-sharp UT teething, hardpoint teeth
- 12" cutting edge length
- Screwed two-component handle with a perfect rubberized grip & good sawing support, can be used for approximate 45° & 90° marking guide
-
This Bahco 12" Pro-Grade Veneer Saw 14 TPI is originally designed for extra thin veneer wood, but is used more for cutting a wide range of panelboards, plywood, laminates, & plastics. The teeth on the curved nose allow to start a cut in the middle of the panel. 14 TPI provide for a fine cut & the hard point induction process on the teeth give longer life of sharpness. Screwed two-component handle with a perfect rubberized grip & good sawing support, can be used for approximate 45° & 90° marking guide. Made in Sweden. -
Product Cutting Edge Length Overall Tool Length Model # Bahco 12" Pro-Grade Veneer Saw ~ 14 TPI 12" 15" PC-12-VEN
For California Residents:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
This Bahco 12" Pro-Grade Veneer Saw 14 TPI is originally designed for extra thin veneer wood, but is used more for cutting a wide range of panelboards, plywood, laminates, & plastics- Reviews
- Questions
USGood quality tool
I've used these for years, they will cut all sorts of synthetic, hard composite materials, laminate, etc. The toothed nose allows you to flip the saw and start a cut in the middle of a board to replace damaged laminate flooring seamlessly. The new version of a very old saw design
USGood quality tool
I've used these for years, they will cut all sorts of synthetic, hard composite materials, laminate etc. The toothed nose allows you to flip the saw and start a cut in the middle of a board to replace damaged laminate flooring seamlessly. New version of a very old saw design
- Reviews
- Questions
USGood quality tool
I've used these for years, they will cut all sorts of synthetic, hard composite materials, laminate, etc. The toothed nose allows you to flip the saw and start a cut in the middle of a board to replace damaged laminate flooring seamlessly. The new version of a very old saw design
USGood quality tool
I've used these for years, they will cut all sorts of synthetic, hard composite materials, laminate etc. The toothed nose allows you to flip the saw and start a cut in the middle of a board to replace damaged laminate flooring seamlessly. New version of a very old saw design